Product prescription for JANTZEN Z-cap STANDARD.
Our Standard capacitor is an axial-type made from metallized polypropylene, especially manufactured for audio application.
The materials we use are chosen for the best sonically results in its price class. Even standard caps are made to provide lowest possibly microphonic effect.
The capacitors are available in a wide range of capacitance values with low tolerance.
The finish is a flame-retardant tape wrap.
Finally, a capacitor at the state of the art in its price class!
All JANTZEN Z-CAPS are LEAD FREE and RoHS COMPLIANT.
Technical Specifications:
Film: metallized polypropylene, special winding techniques
Voltage rating: 400 VDC 200 VAC
Tolerance: max. 5%, typically 3%
Loss ang. tan = 0.0002 for 1kHz / 1 uF
Product prescription for JANTZEN Z-cap SUPERIOR and JANTZEN Z-cap SILVER:
Our Superior and Silver Z-Cap Capasitors are an axial type made of metallized polypropylene, especially manufactured for audio purposes.
The materials we use, were chosen for the best sonically results in this price class.
We use a special machine to wind all our capacitors, so that the capasitors become a very tight reel. This minimizes the inner vibration and keeps microphonic effects as low as possible.
The capacitors are available in a wide range of capacitance values with low tolerance.
The Superior and Silver caps are all protected against high humidity.
Finally, both capacitors are state of art in their price class!
NB! All our Superior and Silver Z-caps will show the true picture immediately, so they do not need any burn in time.
Superior Cap.
0,1 uF - 0,33 uF AC value of the voltage rating 1200 VDC / 800 VAC
0,47 uF - 22 uF AC value of the voltage rating 800 VDC / 425 VAC
Silver Cap.
0,1 uF - 0,33 uF AC value of the voltage rating 1200 VDC / 800 VAC
0,47 uF - 22 uF AC value of the voltage rating 800 VDC / 425 VAC
Technical info and specifications for Z-cap Superior and Z-cap Silver:
All our Superior Caps have high grade copper lead wire to secure the excellent qualtity of these caps.
All our Silver Caps have pure silver lead wire to secure the extreme high quality of these caps.
1. Dielectric: polypropylene
2. Dielectric strength: 1200/800VDC
3. Tolerance: 1% - 2%.
4. Loss angle tan = 0.00002 to 1K
5. Loss angle tan = 0.00001 to 10K
6. All our Jantzen products are LEAD FREE.
We have succeeded to minimize the inner inductance and to produce a fast sounding capacitor via our skilled technique.
The capacitor windings are interleaved, so the inductances effectively cancel each other out.
these two windings are connected in series. This means, it takes two 2uF windings to make a single 1uF capacitor.
This is equal to produce one full 4uF capacity using conventional technology.
|